Hot Tub Setup 101: Location, Plumbing and Electrical Work

A hot tub can be a great addition to any backyard. Not only does it provide a relaxing place to soak after a long day, but it can also be great for hosting parties or enjoying some time with family and friends. If you’re considering purchasing a hot tub, it’s good to know what’s involved in setting one up. Below, we’ll provide you with what you need to know so you can be ready for your brand-new hot tub!

The Perfect Hot Tub Spot: Things to Keep In Mind

When it comes to finding the perfect spot for your hot tub, there are a few things you’ll need to keep in mind. First and foremost, you’ll need to ensure the surface is level. Your hot tub also needs a support structure, and there are many great options to choose from. These include crushed gravel, a reinforced deck, a concrete slab, and more. You just need to choose the one that’s most suitable for the space and the hot tub model you have. 

Another important consideration is the distance of your hot tub from your home. Of course, you’ll need to be able to access an electrical outlet, and it’s a good idea to have it in a space with some privacy. You can also very easily plant some trees or shrubbery around your hot tub if you don’t already have the level of privacy you desire.

Hot Tub Plumbing: What You Need to Know

Now that you’ve found the perfect spot for your hot tub, it’s time to start thinking about plumbing. First, in terms of water supply, you’ll need to connect your hot tub to a water source, either directly or indirectly. Connecting it directly is more straightforward, but if that’s not possible (or if you prefer not to), you can also connect it indirectly using a garden hose. 

A lot of hot tubs already have plumbing built into the cabinet. You can check the hot tub model to find out what its pump, filter, heater, and skimmer are like. These systems allow for one continuous cycle of flowing water. Although it’s best to hire a plumbing professional if any problems arise, it’s still a good idea to become familiar with your specific hot tub model. Additionally, you can also ask for help from a hot tub dealer near you for some expert advice.

Electrical Work For Hot Tubs: Understanding the Basics

Once the plumbing is sorted out, it’s time to start thinking about electrical work. Again, this is one area where we recommend leaving things to the professionals. Unless you’re a certified electrician, attempting to do electrical work on your own could be dangerous.

But that doesn’t mean you can’t understand the basics of what’s involved. For starters, you’ll need to find out where the electrical panel is located in your home and ensure that there’s a spot for the hot tub’s GFCI (ground fault circuit interrupter). Your hot tub also needs to have its own circuit – a 50 to 60-amp breaker would work well if it’s average-sized. Going back to hot tub placement, you also need to consider its accessibility in relation to the electrical work and the power source. Having enough space around the spa would be best, and it should be at a safe distance from power lines or wires.

Now that you know the basics of hot tub setup, it’s time to start planning your own! Just remember to take things slow, do your research, and hire a professional if needed. With a little effort and planning, you’ll have your very own hot tub up and running in no time. 

To learn more about choosing the best hot tub for you and your home, download our free buyer’s guide today!

Download Buyer's Guide

Download Buyer's Guide

I am interested in *

Sending

Leave a Reply

Your email address will not be published.